lemon-mirror:
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission Control System >> Inhibitor Switch >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the inhibitor connector (A) and then remove the shift cable by removing nut (B).
    Fig 1: Inhibitor Connector And Shift Cable Nut
    G10382912Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the manual control lever (B) after removing a nut (A).
  4. Remove the inhibitor switch assembly after removing the bolts (C).
    Fig 2: Manual Control Lever Nut And Inhibitor Switch Assembly Bolts
    G10382913Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror