lemon-mirror:
Home >> Hyundai >> 2016 >> Genesis 3.8, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Disconnect the engine coolant temperature sensor connector (A).
  4. Remove the water temperature sensor from the water temperature control assembly.
    CAUTION:
    • Note that engine coolant may leak out of the water temperature control assembly when removing the sensor.
    Fig 1: Identifying Engine Coolant Temperature Sensor Connector
    G10452218Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror