lemon-mirror:
Home >> Hyundai >> 2016 >> Genesis 5.0 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Fuel Tank Pressure Sensor (FTPS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFFf and disconnect the negative (-) battery cable.
  2. Fold the rear seat cushion.
  3. Remove the sub fuel sender service cover (A) after removing installation screw.
    Fig 1: Sub Fuel Sender Service Cover
    G10465279Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel tank pressure sensor connector (A).
  5. Remove the fuel tank pressure sensor from the sub fuel sender after loosening nut.
    Fig 2: Fuel Tank Pressure Sensor Connector
    G10465280Courtesy of HYUNDAI MOTOR AMERICA