Repair procedures: Inspection: Toe

Fig 1: Measuring Toe

Courtesy of HYUNDAI MOTOR AMERICA

Item	Description
A-B < 0	Positive (+) toe (toe in)
A-B > 0	Negative (-) toe (toe out)

NOTE:

Toe-in adjustment should be made by turning the right and left tie rods with the same torque
When adjusting toe-in, loosen the outer bellows clip to prevent the bellows clip from being twisted.
After the adjustment, tighten the tie rod end lock nuts firmly and reinstall the bellows clip.
Adjust each toe-into be within the range of ±0.1°.