lemon-mirror:
Home >> Hyundai >> 2016 >> Genesis Coupe 3.8, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Fuel Pump Resistor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the fuel pump resister connector.
  3. Remove the fuel pump resistor (A) after removing the installation bolts (B).
    Fig 1: Fuel Pump Resistor
    G10493876Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror