lemon-mirror:
Home >> Hyundai >> 2016 >> Tucson Limited, FWD >> Repair and Diagnosis >> Electrical >> Starter >> Button Engine Start System >> Start/Stop Button >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Proceed to Body - "CRASH PAD LOWER PANEL ")

  3. Separate the SSB from the crash pad after pressing the retaining clips (A) on both sides of the SSB.
    Fig 1: Pressing SSB Retaining Clips
    G11670495Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the SSB (B) after disconnecting the connector (A).
Fig 2: Locating SSB Connector
G11670496Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror