lemon-mirror:
Home >> Hyundai >> 2016 >> Tucson Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to "INTAKE AND EXHAUST SYSTEM - 1.6L " in EM article).
  3. Disconnect the injector connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
Fig 1: Removing Sensor From Cylinder Block
G11675691Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror