lemon-mirror:
Home >> Hyundai >> 2016 >> Tucson SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> Notes

Repair Procedures: Removal: Notes

[Bank 1/Sensor 1] 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.
Fig 1: Locating Knock Sensor (KS) Connector - Bank 1/Sensor 1
G11643662Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Locating Knock Sensor (KS) - Bank 1/Sensor 1
G11643663Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror