lemon-mirror:
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair Procedures >> Rear Power Window Switch Inspection

Rear Power Window Switch Inspection

  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the Rear Door Trim Panel.

    (Refer to: the BD procedure - "REAR DOOR ").

  3. Disconnect the connector from the switch.
    Fig 1: Disconnecting Rear Power Window Switch Terminal
    G10605929Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for continuity between the Terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 2: Rear Power Window Switch Terminal Continuity Chart
    G10605930Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the Power Window Switch after loosening 2 Screws.
· About lemon-mirror