lemon-mirror:
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Remove the Rear Seat (Refer to: "Seat" in BD procedure).
  3. Remove the Fuel Pump Service Cover (A).
    Fig 1: Fuel Pump Service Cover Location
    G10607964Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the Fuel Tank Pressure Sensor Connector.
  5. Remove the Fuel Tank Pressure Sensor (A) after releasing the Hooks vertically.
    Fig 2: Fuel Tank Pressure Sensor Location
    G10607965Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror