lemon-mirror:
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Remove the Intake Manifold (Refer to: "Intake And Exhaust System" in EM procedure).
  3. Disconnect the Injector Connector (A).
  4. Remove the Installation Bolt (B) and then remove the Sensor from the Cylinder Block.
    Fig 1: Injector Connector And Sensor Installation Bolt
    G10607942Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror