lemon-mirror:
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator >> Repair Procedures >> Removal And Installation

Removal And Installation

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the alternator connector (A) and the cable (B) from the "B" terminal.
    Fig 1: Disconnecting Alternator Connector And Cable From B Terminal
    G12088313Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the drive belt.

    (Refer to Engine Mechanical System - "DRIVE BELT ")

  5. Remove the alternator (A).

    Tightening torque: 

    26.5 ~ 33.3 N.m (2.7 ~ 3.4 kgf.m, 19.5 ~ 24.6 lb-ft)

    Fig 2: Removing Alternator
    G12088314Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is reverse order of removal.
    NOTE: Do not disassemble the Lambda 3.3L engine alternator. The alternator inner parts will not be supplied. A faulty occurs, inspect charging system first. If necessary, replace the alternator assembly.
· About lemon-mirror