lemon-mirror:
Home >> Hyundai >> 2017 >> Elantra Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the installation bolts, and then remove the valve from the surge tank.
    Fig 1: Disconnecting Variable Intake Solenoid Valve Connector And Vacuum Hoses
    G12024946Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror