lemon-mirror:
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolts (B), and then remove the sensor from the surge tank.
Fig 1: Locating Manifold Absolute Pressure Sensor Connector And Installation Bolts
G12039360Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror