lemon-mirror:
Home >> Hyundai >> 2021 >> Tucson Value, FWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch >> Repair Procedures >> Installation

Repair Procedures: Installation

CAUTION:
  • Do not reuse the shear bolts.
  • When installing the new shear bolts to the ignition switch assembly, tighten the shear bolts until its head is cut off.
  1. Install the key lock cylinder.
  2. Install the key warning switch.
  3. Install the key warning/immobilizer connector.
  4. Connect the ignition switch connector after Install the ignition switch.
  5. Install the multifunction switch.
  6. Install the steering column shrouds.
  7. Install the driver crash pad lower panel.
  8. Connect the negative (-) battery terminal.
· About lemon-mirror