lemon-mirror:
Home >> Hyundai >> 2021 >> Veloster Turbo >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the steering column upper and lower shroud panel.

    (Refer to Body - "STEERING COLUMN SHROUD PANEL ")

  4. Remove the multifunction switch.

    (Refer to Body Electrical System - "MULTIFUNCTION SWITCH ")

  5. Remove the key warning/immobilizer connector.
    G13054856Courtesy of HYUNDAI MOTOR AMERICA
  6. Insert key and turn it to ACC position.
  7. Pushing lock pin (B) with the awl.
    G13054857Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the key lock cylinder (A).

    B: Key warning switch

    C: Ignition switch connector

    G13054858Courtesy of HYUNDAI MOTOR AMERICA
  9. Disconnect the ignition switch connector (A).
    G13054859Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the ignition switch (B) after loosening the mounting bolts.
    G13054860Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror