lemon-mirror:
Home >> Hyundai >> 2023 >> Kona N >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery (-) terminal.
  2. Remove the canister assembly.

    (Refer to Emission Control System - "CANISTER ")

  3. Remove the canister protector (A) after loosening the mounting bolt & fastener.
     
    G16186245Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the canister cover (A) after loosening the mounting bolt & clip.
    G16186246Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the clip, and then separate the fuel tank air filter (A) from the canister after rotating it in the direction of the arrow in the figure.
    G16186247Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the canister close valve extension wiring (A).
    G16186248Courtesy of HYUNDAI MOTOR AMERICA
  7. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the figure.
    G16186249Courtesy of HYUNDAI MOTOR AMERICA
    G16186250Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror