lemon-mirror:
Home >> Hyundai >> 2023 >> Tucson Plug-In Hybrid Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (PHEV) >> Mass Air Flow Sensor (MAFS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery (-) cable.
  2. Disconnect the mass air flow sensor connector (A) and the installation clamp (B).
  3. Disconnect the air intake hose (C).
    G16172441Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the mass air flow sensor (A) after loosening mounting bolt.

    Tightening Torque: 

    5 - 7 N.m (0.5 - 0.7 kgf.m, 3.6 - 5.1 lb.ft)

    G16172442Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror