Repair Procedures: Installation
- To install, reverse the removal procedure.
- Inject the automatic transaxle fluid and inspect the fluid level.
(Refer to Hydraulic System - " AUTOMATIC TRANSAXLE FLUID (ATF) ")
CAUTION:- After ATF level check or exchange, be sure to remove residual ATF on transaxle case.
(Be especially sure to remove residual ATF between automatic transaxle case and valve body cover)
- After installing the valve body cover, make sure to check the oil leakage at the connection area with the engine ON.
- After ATF level check or exchange, be sure to remove residual ATF on transaxle case.
- Fill the engine and transaxle system coolant.
(Refer to Engine Mechanical System - " ENGINE COOLANT ")
- Add coolant on the hybrid motor cooling system and perform air bleeding job using diagnostic tool.
(Refer to Hybrid Motor System - " COOLANT ")