Starter Specifications

STARTER SPECIFICATIONS (I30)

Application	Specification
Minimum Commutator Diameter	1.102" (28.0 mm)
Minimum Brush Length	.413" (10.5 mm)
Brush Spring Tension	2.9-4.0 lbs. (1.3-1.8 kg)
Bearing Metal-To-Armature Shaft Clearance	Less Than .008" (.2 mm)
Pinion Front Edge-To-Stopper Clearance	.012-.098" (.3-2.5 mm)

STARTER SPECIFICATIONS (QX4)

Application

Specification

Minimum Commutator Diameter

1.134" (28.8 mm)

Minimum Brush Length

.276" (7.0 mm)

Brush Spring Tension

2.6-5.3 lbs. (1.2-2.4 kg)

Pinion Front Edge-To-Pinion Stopper Clearance

⁽¹⁾

⁽¹⁾	Information not available at time of publication.

STARTER SPECIFICATIONS (Q45)

Application	Specification
Minimum Commutator Diameter	1.236" (31.4 mm)
Minimum Brush Length	.433" (11.0 mm)
Brush Spring Tension	7.1-8.6 lbs. (3.2-3.9 kg)
Pinion Front Edge-To-Stopper Clearance	.020-.079" (.5-2.0 mm)