Hazard and Horn Reminder: Notes
Power is supplied at all times
- to multi-remote control relay terminals 1, 3 and 6
- through 10A fuse [No. 20, located in the fuse block (J/B)],
- to horn relay terminals 1 and 3
- through 10A fuse (No. 36, located in the fusible link and fuse box) and
- to horn relay terminal 6
- through 10A fuse (No. 41, located in the fusible link and fuse box).
When smart entrance control unit receives LOCK or UNLOCK signal from remote controller with all doors closed, ground is supplied
- to multi-remote control relay terminal 2
- through smart entrance control unit terminal 7, and
- to horn relay terminal 2
- through smart entrance control unit terminal 19
Multi-remote control relay and horn relay are now energized, and hazard warning lamp flashes and horn sounds as a reminder.
The hazard and horn reminder has a horn chirp mode and a non-horn chirp mode.