Work Flow

1. Turn ignition switch ON.
2. Warning lamps should illuminate (seat belt warning or door warning etc.).

Do warning lamps illuminate? 

1. YES >> GO TO 2
2. NO >> Power supply and ground check. Refer to POWER SUPPLY AND GROUND CIRCUIT CHECK  .

Meter/gauges/A/T indicator should indicate.

Do indicators indicate? 

1. YES >> GO TO 3
2. NO >> Fluorescent lamp check. Refer to FLUORESCENT LAMP CHECK  .

Preform self-diagnosis mode. Refer to METER/GAUGES OPERATION, ODO/TRIP METER AND A/T INDICATOR  Can diagnosis mode be activated?

1. YES >> GO TO 4
2. NO >> Replace unified meter control unit (sub)

Check odo / trip meter segment or A/T indicator segment.

Do all segments illuminate? 

1. YES >> GO TO 5
2. NO >>
   • Replace unified meter control unit (sub) and meter and gauge assembly.
   • Check A/T indicator. Refer to A/T INDICATOR DOES NOT ILLUMINATE  .

Check meter / gauge operation in self-diagnosis mode. Refer toMETER/GAUGES OPERATION, ODO/TRIP METER AND A/T INDICATOR  .

OK or NG 

1. OK >> Symptom chart 2
2. NG >> Symptom chart 1