lemon-mirror:
Home >> Infiniti >> 2004 >> FX45 >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Engine Control System) >> DTC P1225 TP Sensor >> DTC Confirmation Procedure >> Testing Condition

Testing Condition

WARNING: This page is about a different car, the 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Before performing the following procedure, confirm that battery voltage is more than 10V at idle  .

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select DATA MONITOR mode with CONSULT-II. See Figure.
  3. Turn ignition switch OFF, wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. If 1st trip DTC is detected, Go to DIAGNOSTIC PROCEDURE 

With GST 

Follow the procedure with CONSULT-II above.