lemon-mirror:
Home >> Infiniti >> 2004 >> M45 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0340: CMP Sensor (Phase) >> Component Inspection >> Camshaft Position Sensor (Phase)

Camshaft Position Sensor (Phase)

  1. Loosen the fixing bolt of the sensor.
  2. Disconnect camshaft position sensor (PHASE) harness connector.
    Fig 1: Identifying Camshaft Position Sensor (PHASE)
    G00795998Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
  5. Check resistance as shown in the figure.
    Fig 2: Reference Data Chart
    G00795999Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Checking Camshaft Position Sensor (PHASE) Resistance
    G00796000Courtesy of NISSAN MOTOR CO., U.S.A.
· About lemon-mirror