Removal and Installation: Installation

Note the following, and install in the reverse order of removal.

• When installing the transfer to the transmission, install the mounting bolts following the standard below.
  Fig 1: Identifying Mounting Bolts Standard

  Courtesy of NISSAN MOTOR CO., U.S.A.
  BOLT SPECIFICATION CHART
  
  

  Bolt No.	1	2	3	4
  Quantity	4	3	2	1
  Bolt length "l  " mm (in)	75 (2.95)	45 (1.77)	40 (1.57)	30 (1.18)
  Tightening torque N.m (kg-m, ft-lb)	37 (3.8, 27)

• After the installation, check the fluid level and for fluid leakage. Refer to "INSPECTION ".