lemon-mirror:
Home >> Infiniti >> 2007 >> M35 Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Shift Control System >> Adjustment of A/T Position >> 2WD Models

2WD Models

  1. Loosen nut (2) of pivot pin (1).
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut (2) to specified torque. Refer to "CONTROL ROD COMPONENTS (2WD MODELS) ".
    Fig 1: Identifying Pivot Pin, PNP Switch And Nut (2WD Models)
    G05213344
· About lemon-mirror