Component Function Check

1. Select "SLIDE SW-FR", "SLIDE SW-RR" in "Data monitor" mode with CONSULT-III.
2. Check sliding switch signal under the following conditions.
   MONITOR ITEM CONDITION CHART
   
   

   Monitor item	Condition		Status
   SLIDE SW-FR	Sliding switch (forward)	Operate	ON
   		Release	OFF
   SLIDE SW-RR	Sliding switch (backward)	Operate	ON
   		Release	OFF

Is the indication normal? 

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to , "DIAGNOSIS PROCEDURE ".