Component Function Check

1. Select "SLIDE PULSE" in "Data Monitor" mode with CONSULT-III.
2. Check sliding sensor signal under the following conditions.
   MONITOR ITEM STATUS REFERENCE
   
   

   Monitor item	Condition		Valve
   SLIDE PULSE	Seat sliding	Operate (forward)	Change (increase)(1)
   		Operate (backward)	Change (decrease)(1)
   		Release	No change(1)
   (1) The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal? 

YES: INSPECTION END

NO: Perform daiagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".