lemon-mirror:
Home >> Infiniti >> 2012 >> M35h >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid Control System >> Basic Inspection >> Clutch 1 Position Learning >> Work Procedure

Work Procedure

CAUTION:
  • Before using inspection mode 1 when the Li-ion battery level is low, in order to engage clutch 1 and charge the battery from the engine, use CONSULT "EV/HEV" "DATA MONITOR" mode and check that the "HV BATTERY LEVEL" reading is 50% or more, or else use the "Li-ion battery state of charge" in the information display on the combination meter and check that the battery level is 50% or more.
  • Check that the engine coolant temperature is 70 °C (158 °F) or more before using inspection mode 1.
  1. PERFORM CLUTCH 1 POSITION LEARNING
    1. Set the vehicle to READY.
    2. Shift the selector lever position N and check that an engine stops.
    3. Fully depress accelerator pedal and start an engine.
    4. Fully release accelerator pedal and stop an engine.
    5. Repeat step  3 and  4 for 50 times.

      : END

· About lemon-mirror