Work Procedure

CHECK ANTI-PINCH FUNCTION

Fully open the door window.
Place a piece of wood near fully closed position.
Close door glass completely with AUTO-UP.
Check the following conditions:
- Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
- Check that glass does not rise not when operating the power window main switch while lowering.
  CAUTION:
  - Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
  - Check that AUTO-UP operates before inspection when system initialization is performed.
  - Do not check with hands and other body parts because they may be pinched. Do not get pinched.
  : END