lemon-mirror:
Home >> Infiniti >> 2018 >> Q60 Pure, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction And Basic Inspection) (2.0L) >> Basic Inspection >> Configuration >> Work Procedure >> ECM

Work Procedure: ECM

  1. PERFORM CONFIGURATION 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. Select the "Re/programming, Configuration" of CONSULT.
    3. Perform configuration according to the CONSULT display.
    4. Select the "Manual Configuration". (If necessary)
    5. Perform configuration according to the CONSULT display.

    GO TO 2.

  2. CHECK DTC 

    SYMBOL With CONSULT

    1. Turn ignition switch OFF and wait for 10 seconds or more.
    2. Turn ignition switch ON.
    3. Perform self-diagnosis.
    4. Check that no DTC is detected.

    WORK END

· About lemon-mirror