System Description: Notes
- The adoption of log-in function allows stored user-to-user settings to be called up through the recognition of the last user by the Intelligent Key.
- The log-in function identifies the driver through the use of the intelligent key and calls up driver-specific settings for items such as audio, navigation, seat position, and PERSONAL mode settings of the Infiniti drive mode selector. Refer to. System Description
- BCM receives a key ID signal from the intelligent key and transmits the signal to chassis control module, and head up display unit, display control unit, combination meter, A/C auto amp, driver seat control unit, ADAS control unit via CAN communication.
- Chassis control module transmits a key link signal to each unit via CAN communication.
- Display control unit transmits a user information signal to each unit via CAN communication and AV communication.
- Each unit calls up user information according to signals from BCM, chassis control module, and display control unit.
- BCM saves/reads set values of vehicle settings.
- Driver seat control unit saves/reads set values such of driver seat position, steering position and outside mirror position.
- A/C auto amp. saves/reads set values of switch settings rear switch setting and A/C menu.
- Combination meter saves/reads set values of meter screen settings.
- ADAS control unit saves/reads set values of ON/OFF settings for each assist function.
- Chassis control unit saves/reads settings of PERSONAL MODE characteristics of the Infiniti drive mode selector.
- Audio unit saves/reads set values of sound, radio, music box, navigation system settings, voice recognition and audio source bar.
- Head up display unit saves/reads set values of head up display settings.
- The number of registerable Intelligent Keys interlocked with user settings is 4.
- The driver's intelligent keys can be identified in the following order: Used for opening/closing by remote control => located close to the driver's door => identified at an engine start.