Power Window Switch Continuity (Driver's Side Switch)

Remove switch from door trim panel. Disconnect power window switch harness connector. Using an ohmmeter, check continuity between specified switch terminals with power window switch in specified position. See DRIVER'S POWER WINDOW SWITCH CONTINUITY CHART .
Continuity is checked between 2-terminal connector and 10-terminal connector. For switch terminal identification, seeFigure and Figure . If continuity is not as specified, replace appropriate switch.

DRIVER'S POWER WINDOW SWITCH CONTINUITY CHART

Sw. Application & Position

Check Continuity Btwn. ⁽¹⁾ Term's. No.

Left Front

DOWN

1 & 6; 2 & 5

OFF

2 & 5; 2 & 6

1 & 5; 2 & 6

Right Front

DOWN

1 & 2; 2 & 1

OFF

2 & 1; 2 & 2

1 & 1; 2 & 2

Left Rear

DOWN

1 & 3; 2 & 4

OFF

2 & 3; 2 & 4

1 & 4; 2 & 3

Right Rear

DOWN

1 & 9; 2 & 10

OFF

2 & 9; 2 & 10

1 & 10; 2 & 9

Lock

OFF (Unlock)

1 & 7

ON (Lock)

N/A

⁽¹⁾	First number is 2-terminal connector. Second number is 10-terminal connector. SeeFigure and Figure .