Repair and Diagnosis: Electrical: Starters: Overhaul: Starter: Disassembly

1. Remove the lead wire (1) from the magnetic switch.
2. Remove the through bolts (2). See Fig 1.
3. Remove the yoke from the magnetic.
4. Remove the yoke cover. See Fig 2.
5. Use the long nose pliers to remove the brush and brush holder. See Fig 3.
6. Remove the armature.
7. Remove the housing.
8. Remove the overrunning clutch from the housing. See Fig 4.
9. Remove the return spring from the magnetic switch. See Fig 5.
10. Remove the steel ball from the overrunning clutch. See Fig 6.
11. Remove the idle pinion from the magnetic switch. See Fig 7.
12. Remove the retainer from the magnetic switch. See Fig 7.
13. Remove the magnetic switch.

Fig 1: Removing Lead Wire & Through Bolts

Courtesy of ISUZU MOTOR CO.

Fig 2: Removing Yoke Cover

Courtesy of ISUZU MOTOR CO.

Fig 3: Removing Brush & Brush Holder

Courtesy of ISUZU MOTOR CO.

Fig 4: Removing Overrunning Clutch From Housing

Courtesy of ISUZU MOTOR CO.

Fig 5: Removing Return Spring From Magnetic Switch

Courtesy of ISUZU MOTOR CO.

Fig 6: Removing Steel Ball From Overrunning Clutch

Courtesy of ISUZU MOTOR CO.

Fig 7: Removing Idle Pinion From Magnetic Switch

Courtesy of ISUZU MOTOR CO.