Battery Reconnect Procedure
NOTE:
Whether one or both cables were disconnected, a minimum of 30 seconds MUST elapse between disconnection of the first cable and connection of the last cable. A clean final connection must be made. Do not allow temporary contact.
- Connect the battery terminal(s).
- Reset the clock.
- Enter the radio security code.
- Cycle (both) door windows up and down to establish the upper and lower reference points. Turn ignition ON. Lower the glass to the stop and hold the switch in the DOWN position for an additional 5 seconds. Raise the glass fully and hold the switch in the UP position for an additional 5 seconds.
- Turn ignition OFF.