lemon-mirror:
Home >> Jeep >> 1982 >> Pickup J20, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Cruise Control Systems >> Testing >> Cruise Command System Tests >> System Disengagement

System Disengagement

  1. With ignition and control switch "ON" and brake or clutch pedal depressed, lamps 1, 2 and 4 should be on. Lamps 3, 5 and 6 should be off. Lamp 3 should be on when brake or clutch pedal is released.
  2. If lamp 2 is off, check speed sensor for correct output voltage. Check Grey and Dark Blue wire at speed sensor connector for continuity to regulator connector. Check terminals 2, 3, 5 and 7 at regulator connector for proper connection to wires.
  3. If lamp 3 is off, check brake light (and clutch, if equipped) switch adjustment. Check Brown, Light Blue and Dark Green wire connections for continuity between connectors.
  4. If lamp 4 is off, check for defective connection at terminals 2 and 11 on regulator connector. Check operation of throttle position feedback potentiometer on servo.
  5. If lamp 3 is off when brake or clutch pedal is released, check brake light (and clutch, if equipped) switch adjustment. Check Brown, Light Blue and Dark Green wire connections for continuity between connectors.
· About lemon-mirror