Control Circuit Tests

Control circuit components should be tested in the following order:

• Starter relay. See STARTER RELAY TEST  under BENCH TESTING.
• Starter solenoid. See SOLENOID TEST  under BENCH TESTING.
• Ignition switch. See IGNITION SWITCH TEST  .
• On manual transmission equipped models, Clutch Pedal Position (CPP) switch. See CLUTCH PEDAL POSITION SWITCH  .
• On automatic transmission equipped models, Park/Neutral Position (PNP) switch or Transmission Range (TR) sensor. See PARK/NEUTRAL POSITION SWITCH  or TRANSMISSION RANGE (TR) SENSOR  .