Control Circuit Tests

Control circuit components should be tested in the following order:

• Starter relay. See STARTER RELAY TEST  under BENCH TESTING.
• Starter solenoid. See SOLENOID TEST  under BENCH TESTING.
• Ignition switch. See IGNITION SWITCH TEST .
• On M/T equipped models, Clutch Pedal Position (CPP) switch. See CLUTCH PEDAL POSITION SWITCH .
• On A/T equipped models, Park/Neutral Position (PNP) switch or Transmission Range (TR) sensor. See PARK/NEUTRAL POSITION SWITCH  or TRANSMISSION RANGE SENSOR .