Hard Wired Inputs

The hard wired inputs to the BCM include the following:

• A/C on/off control
• Ambient temperature sensor signal
• Body control module flash enable
• Door lock switch MUX
• Driver door ajar switch sense
• Flip-up glass ajar switch sense
• Flip-up glass release switch sense
• Fog lamp switch sense
• Front wiper park switch sense
• Front wiper switch MUX
• Front washer pump driver
• Fused B+
• Fused ignition switch output (run-acc)
• Fused ignition switch output (run-start)
• Headlamp switch MUX
• High beam switch sense
• Hood ajar switch sense (premium with VTSS) in markets where required only
• Key-in ignition switch sense
• Left cylinder lock switch sense (premium with VTSS only) omitted in some markets as required
• Panel lamps dimmer switch MUX
• Passenger door ajar switch sense (input from 3 ajar switches connected in parallel)
• Radio control MUX (premium with remote radio switches only)
• Rear courtesy lamp control
• Rear window defogger control
• Rear wiper intermittent driver
• Rear wiper on driver
• Right cylinder - lock switch sense (premium with VTSS only) omitted in some markets as required
• RKE antenna (2 circuits) premium with RKE only
• Tailgate ajar switch sense
• Tailgate cylinder lock switch sense
• Vehicle speed sensor