lemon-mirror:
Home >> Jeep >> 2002 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - On-Vehicle Adjustments >> Throttle Position Sensor

Throttle Position Sensor

NOTE: TP sensor is not adjustable. Output voltage (center terminal of TP sensor) should be approximately .96 volt at closed throttle (idle) and approximately 4.49 volts at Wide Open Throttle (WOT). Voltage should increase gradually and smoothly as throttle is slowly opened from idle to WOT. TP sensor must be replaced if it is out of range.
· About lemon-mirror