lemon-mirror:
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Window Regulator >> Installation - Front

Installation - Front

  1. Install the regulator assembly.
  2. Connect the electrical connector.
  3. Tighten the bolts to 9 N.m (80 in. lbs.). For the passenger side regulator, tighten bolts in the following sequence, at the following positions; 12 o'clock, 6 o'clock, then 9 o'clock position. For the driver side regulator, tighten bolts in the following sequence, at the following positions; 12 o'clock, 6 o'clock, then 3 o'clock position.
  4. Connect the runout tube clip.
  5. Remove the glass support and connect to the regulator lift plate.
  6. Install the waterdam. See WATERDAM  .
· About lemon-mirror