lemon-mirror:
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> Electrical >> Gauges >> Message Systems >> Overhead Console >> Installation

Overhead Console: Installation

  1. Position the overhead console in the vehicle and connect the wire harness connectors.
  2. Connect the control module, courtesy lamps and power sunroof switch electrical connectors, if equipped.
  3. Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit.
  4. Install the overhead console retaining screw, located in the front of console near the windshield. Torque the screw to 1.2 N.m (10 in. lbs.).
  5. Connect the negative battery cable.
· About lemon-mirror