lemon-mirror:
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Distribution Center >> Assembly >> Power Distribution Center Assembly >> PDC B+ Terminal Module Installation

PDC B+ Terminal Module Installation

  1. From the bottom of the PDC housing, align and insert the B(+) terminal module into the PDC.
  2. From the bottom of the PDC housing, align and insert the two studs of the. PDC B(+) terminal module through the bus bar in the PDC.
  3. From the bottom of the PDC housing, press the B(+) terminal module gently and evenly into the PDC until both of the latches are fully engaged.
  4. Install the PDC housing lower cover.
· About lemon-mirror