lemon-mirror:
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Map Sensor >> Installation >> 2.4L

Map Sensor: Installation: 2.4L

  1. Clean MAP sensor mounting hole at intake manifold.
  2. Check MAP sensor o-ring seal for cuts or tears.
  3. Position sensor into manifold.
  4. Install MAP sensor mounting screws. Tighten screw to 3 N.m (25 in. lbs.) torque.
  5. Connect electrical connector.
· About lemon-mirror