lemon-mirror:
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Map Sensor >> Installation >> 4.0L

Map Sensor: Installation: 4.0L

  1. Install rubber L-shaped fitting to MAP sensor.
  2. Position sensor to throttle body while guiding rubber fitting over throttle body vacuum nipple.
  3. Install MAP sensor mounting bolt(s) (screws). Tighten screw(s) to 3 N.m (25 in. lbs.) torque.
  4. Install air cleaner intake tube.
  5. Connect electrical connector.
· About lemon-mirror