lemon-mirror:
Home >> Jeep >> 2005 >> Wrangler X, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Spring >> Removal

Suspension System: Front: Spring: Removal

  1. Raise and support the vehicle.
  2. Remove the wheel and tire assemblies.
  3. Position a hydraulic jack under the axle to support it.
  4. Remove the front shocks at the lower mountings. (Refer to SUSPENSION/FRONT/SHOCK - REMOVAL) .
  5. Remove the ABS wire mounting brackets at the axle. (if equipped)
  6. Remove lower suspension arms mounting nuts and bolts from the frame. (Refer to SUSPENSION/FRONT/LOWER CONTROL ARM - REMOVAL) .
  7. Remove the track bar from the axle bracket. (Refer to SUSPENSION/FRONT/TRACK BAR - REMOVAL) .
  8. Remove the right side of the drag link from the right side knuckle. (Refer to STEERING/LINKAGE/DRAG LINK - REMOVAL) .
  9. Lower the axle until the spring is free from the upper mount.
    NOTE: Rotation of the spring and prying down slightly on the axle will aid in removal.
  10. Remove the coil spring retainer clip and remove the spring.
  11. Remove the upper spring isolator. (if needed)
  12. Pull jounce bumper out of mount. (if needed)
· About lemon-mirror