lemon-mirror:
Home >> Jeep >> 2005 >> Wrangler X, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear >> Spring >> Installation

Suspension System: Rear: Spring: Installation

NOTE: Springs can be install with either end up.
  1. Position the coil spring on the axle pad isolator.
  2. Raise the axle into position until the spring seats on the upper isolator.
  3. Connect the stabilizer bar links and shock absorbers to the axle bracket. Connect the track bar to the frame rail bracket.
  4. Remove the supports and lower the vehicle.
  5. Tighten the stabilizer bar links, shock absorbers and track bar to specified torque.
· About lemon-mirror