lemon-mirror:
Home >> Jeep >> 2010 >> Commander Limited, RWD >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Electronic Control Modules (Service Information) >> Standard Procedure >> Module Programming >> Programming The Win

Programming The Win

CAUTION: Read all notes and cautions for programming procedures.
  1. Connect a battery charger to the vehicle.
  2. Connect the scan tool.
    NOTE: Have a unique vehicle PIN readily available before running the routine
    CAUTION: If the PCM and WIN are replaced at the same time, the PCM MUST be programmed before the WIN.
  3. Select "ECU View."
  4. Select "WIN".
  5. Select "Miscellaneous Functions."
  6. Select "WIN Replaced".
  7. Enter the PIN when prompted.
  8. Cycle ignition key after the successful routine completion.
    NOTE: If the PCM and the WIN are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new WIN.
· About lemon-mirror