lemon-mirror:
Home >> Jeep >> 2010 >> Commander Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> PLUG, Glow >> Removal >> Removal

PLUG, Glow: Removal: Removal

CAUTION: Engine temperature must be at least 90°C (194°F) before removing glow plugs. If cylinder head is already removed, warm cylinder head to 90°C (194°F) before removing glow plugs.
  1. Disconnect negative battery cable.
  2. Remove engine cover. Refer to Engine - Removal .
  3. Disconnect glow plug electrical connector (1).
    WARNING: Risk of injury to skin and eyes from handling hot or glowing objects. Wear protective gloves, clothing and eye wear.
  4. Clean glow plug bay.
  5. Remove glow plugs.
· About lemon-mirror