lemon-mirror:
Home >> Jeep >> 2014 >> Compass Limited, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Universal Transmitter >> Standard Procedure >> Erasing Transmitter Codes

Erasing Transmitter Codes

NOTE:

Individual channels (buttons) cannot be erased. Erasing the transmitter codes will erase ALL programmed codes.

To erase programming from the three transmitter buttons:

  1. Press and hold the two outer HomeLink® buttons until the indicator light begins to flash (about 20 seconds). Do not hold the buttons for longer that 30 seconds.
  2. Release both buttons.
  3. HomeLink® is now in the train (or learning) mode and can be programmed at any time using the Programming standard procedure. Refer to STANDARD PROCEDURE .
· About lemon-mirror